Sage Hr Error Connecting To Mysql | +1-866-973-9785

This issue may occur during the installation of Sage, the accounting package, on the server.

You will find a thorough explanation of “Sage 50 HR Error Connecting Mysql” in this article, along with its causes and solutions to fix this error. You need not be concerned if you are unable to connect to your database as well.

Although being able to connect to a database is crucial, being able to fix the problem if you can’t is also useful. Sage software typically starts out with a Sage 50 HR Problem Connecting Mysql error when you initially attempt to connect to your MySQL database. This problem may occasionally be brought on by a third-party plugin or add-on you are using.

Sage 50 HR Error Connecting Mysql – What is It?

An error message claiming that the MySQL server has failed is one problem that users frequently run across while connecting to their Sage HR server. There are a number of potential causes for this issue, but the most prevalent one is that the user’s MySQL database is out of current. When you open a company file or a sample file, a Sage 50 error connecting to the database message will appear. A number of messages may appear on your screen when the Connection Manager is unable to start the database engine.

What are the reasons for the Sage 50 HR Connecting Mysql Error?

This error can have a number of different causes, and different users will have different experiences with it. The most typical causes of the Sage HR error connecting to MySQL include the following:

Failed to connect to MySQL:

This is often brought on by a network or MySQL server issue. Make sure you have a working internet connection and a valid, current TCP/IP address.

Failed to establish connection:

Numerous factors, such as obsolete or damaged MySQL software, slow connections, or defective hardware, can contribute to this failure. Ensure that all system requirements are met and that the correct version of MySQL is installed on your machine.

What are the Fixes for the Sage 50 HR Connecting Mysql Error?

Resolution 1:

To locate the Sage 50 HR File, go here.

  • For Windows Vista, 7, Server 2008, and 2011 you need to follow the path C:\Program Data\Sage\HR.
  • For Server 2000, 2003, or Windows XP you need to follow the path C:\Documents and Settings\All Users\Application Data\Sage\HR

If you’re looking for Sage MySQL’s temporary folder

  • For Server 2000, 2003, or Windows XP you need to follow the path C:\Documents and Settings\All Users\Application Data\Temporary SageMySQL Files.
  • For Windows Vista, 7, Server 2008, and 2011 you need to follow the path C:\ProgramData\Temporary SageMySQL Files.

Resolution 2: Verify the location of the data files on your server PC.

If the data files are located on your server computer, you must take the following actions:

1. You need to test with the sample company

Follow the steps listed below if you need to test with the sample company.

  • For Windows XP, you must navigate to C:Documents and SettingsAll UsersDocumentsSimply Accounting201XSamdata if you want to test with the company sample.
  • For Windows 7, Windows Vista, and Windows 8, you can test with the company sample by going to C:UsersPublicPublic DocumentsSimply Accounting201XSamdata.

2. You need to check if the sample company opens successfully. 

If the sample company launches successfully, you must subsequently do the following actions:

  • The firewall on the server where the data is kept must first be configured properly.
  • Then you must determine whether or not the data for your business is kept on a server and, if so, which drive.
  • Most likely, you have data on the D: disc and programmes loaded on the C: disc. Check the shared folder’s permissions to see what access the data has.
  • The next step is to make a new sharing folder at Croot. :’s
  • Once finished, move the contents to the new folder right away.
  • Ensure that all users have full permissions at this point.
  • Finally, in the data file, use the server’s IP address rather than the computer name.

3. You must determine whether the sample company opens for business.

The following steps must be followed if you want to determine whether the example company will open or not:

  • First, see if any Sage 50 processes have been blocked by the firewall or antivirus software; if so, give them full access.
  • The Microsoft.NET Framework may be the problem if your antivirus and firewall are properly installed but the sample business still cannot run on Windows XP.
  • Now, if you are experiencing problems with the local sample company when using Sage 50 on a computer running Windows Vista, Windows 7, or Windows 8, it’s possible that the.NET components on your operating system were corrupted or damaged.

If you wish to verify that the data files are in C:PROGRAM FILES (or C:PROGRAM FILES (x86)), do the following: and if the sample company file opens, you must then take the following actions:

  • The.SAJ folder and.SAI file must first be transferred to a new location. Take them out of the C:/Program Files (or C:/Program Files (x86)) directory.
  • Then right-click 🖱️on the SAJ when you’re finished.
  • Select Properties from the drop-down menu that appears after that.
  • Make sure the Read-only and Hidden checkboxes are both unchecked at this point.
  • Once done, go to Security if they are.
  • Then confirm that each of the aforementioned Groups or Usernames has access rights to Full Control.
  • After that, you need to click OK.
  • Then go to the SAJ folder and open it.
  • The following step is to identify and delete the PID file 🗄️.
  • Finally, double-check that you can now open the data file with ease.

Resolution 4: You need to check ODBC Issue

The steps below must be followed if you want to check the ODBC issue:

  • First, check to see if ODBC is installed in the Programs and Features or Add Remove Programs sections of the control panel.
  • The ODBC 5.2(a)/MySQL Connector and ODBC 3.51/MySQL Connector must then be connected, as you must confirm.
  • The ODBC/MySQL Connector must then be installed, which you must confirm.
  • After that, if required, double-check both versions.
  • Now use the path C:\Sage\Sage 50 Accounting Installer Files 🗄️(navigate to 201*\ BIN\MySQLODBC for CDN Release).
  • Finally, check if X denotes the Sage version (year).

Resolution 5: Find the restore point if you are an existing user and your PC is not new.

  • Start by returning your computer to the settings it had when the Sage 50 application was functioning.
  • Utilizing Windows Vista, Windows 7, or Windows 8 restore points is advised.
  • Then navigate to Windows Start to find the restore points.
  • Go to the Control Panel after that.
  • The next step is to decide between the System and Recovery options.
  • To find the restore point when the.NET components were upgraded, follow the wizard procedure.
  • There are a few things you may try to fix the problem if you get an HR error when attempting to connect to MySQL. Make sure your MySQL server is updated first. You can then look at your server settings. Next, confirm that MySQL’s port number is open and that your firewall is enabled. Lastly, confirm that the appropriate MySQL extension is installed on your computer.

How can the Sage 50 HR Error Connecting Mysql be fixed while making sure the firewall on the server where the data is kept is configured correctly?

Check that the firewall on the server where the data is kept is configured properly by following the procedures provided:

  • You must first choose Control Panel from the Windows icon.
  • The Control Panel window will then show up.
  • Select System and Security from the drop-down menu that appears after that.
  • The System and Security Panel will now show up.
  • Selecting Windows Firewall from the drop-down menu is the next action.
  • Finally, if you see a green checkmark, use Windows Firewall.

What are the fundamental system specifications needed to function with Sage 50 HR Error Connecting Mysql?

The minimal system requirements are as follows:

  •  Server 2008 R2 or higher is required.
    ● Server 2008 R2 and Server 2008 Service Pack 2 are two separate versions of Server 2008.
    ● Windows 7 or above is required.

Should you verify the freshness of your PC before attempting to fix the Sage 50 HR Error Connecting Mysql?

Yes, you must reset to the factory default settings.

  • In order to return Windows Vista, Windows 7, or Windows 8 to their factory default settings, use the recovery disc provided by the computer’s maker.
  • You can also look at the manufacturer’s information.

What steps should you take to ensure that your MySQL server is up to date in order to fix the Sage 50 HR Error Connecting Mysql?

By visiting the MySQL website and looking for the most recent software version, you may verify this. When trying to connect to an old MySQL server, issues could arise. Restarting your PC and MySQL server may help if you are still experiencing problems connecting to MySQL. Any problems with your connection should be resolved as a result.



Leave a Reply